Equipments
Sherpa Slim: Assistance system (winch) for loading/unloading the stretcher
Sherpa Slim is a device that allows easy and safe loading of stretchers.
The device relieves the operator of any effort and makes loading safer. Sherpa Slim can be installed on any Stem stretcher support and used with most stretchers, being versatile and efficient. Due to its low height, this system is also compatible with stretchers with extendable headrest. The compact design allows any type of patient maneuvers, including intubation procedures. It is ideal for bariatric transport, incubator and isolation capsule transport.
Sherpa has been designed to load loads of up to 300 kg at angles of inclination of the stretcher support of max. 15°. The practical remote control (Bluetooth®) allows all operations to be performed directly from the stretcher. It integrates natively with the Stem EDEN hydraulic support, the lowering / raising operations of the stretcher during loading and unloading are controlled by the remote control on the stretcher. The wireless connection of the Sherpa Slim also allows diagnostics and configuration with a dedicated app. This charging system can be connected directly to the vehicle’s power supply, allowing for continuous recharging.
The device is equipped with a double safety system during discharge.
• The first is the S.U.S. (Safe Unload System), which stops the system in the presence of an obstacle during unloading, thus preventing the operator from losing control of the system.
• The second one controls the unloading speed and prevents the stretcher from falling if the legs do not open completely. Sherpa Slim ensures completely safe transports, also thanks to the Active Brake system.
• Maximum capacity: 300 kg
• Dimensions: 551 x 185 x 146 mm
• Weight: 13.7 kg
• Battery included: Li-Ion
• Maximum current absorbed at 12V: 30A
• Certifications: 2006/42/CE; EN 1789; EN1865-5; tested at 10 G
Sherpa Slim winch operation
Visit the manufacturer’s website: www.stem.it
EpiShuttle isolation unit
The EpiShuttle is an isolation unit designed for quick and easy transport of highly infectious and vulnerable patients.
Maximum Patient Safety & Care
The EpiShuttle allows monitoring and advanced treatment to be performed during transport, including emergency procedures like intubation, IV and oxygen line insertion.
Safety of Health Care Professionals
The EpiShuttle provides a completely sealed transparent barrier between the patient and the health care professional, preventing any cross-infection.
No Disinfection
Vehicles that are used for transport of highly infectious patients in the EpiShuttle do not have to be disinfected after patient transport. This saves time and money and ensures that vehicles can remain in operation as much as possible.
Certification
The EpiShuttle is CE-marked as a Class 1 Medical Device. The EpiShuttle is EN 1789 compliant and can be safely used in ambulances, helicopters, and airplanes. Adapters are available for several leading stretcher brands and an L-track attachment with universal brackets.
Personal protection
When transporting an infectious patient inside the EpiShuttle, medical personnel do not need to wear full PPE. This allows for longer shifts and reduces the risk of making mistakes due to fatigue or reduced situational awareness.
Dual Protection
The EpiShuttle air ventilation system can either be configured in negative pressure mode to protect the surroundings from an infectious patient, or in positive pressure mode to protect the patient from the surroundings.
Cost Efficient & Reusable
The EpiShuttle is reusable and can be safely disinfected and re-assembled in less than two hours. This significantly reduces the cost per transport compared to single-use transport isolators.
Air Ventilation System
The air ventilation system generates more than 15 air exchanges per hour to ensure maximum patient comfort and safety. Filters and airtight seals ensure that all contaminants are kept inside the EpiShuttle, even in the event of rapid decompression of an airplane cabin.
Positive Pressure protects the vulnerable patient from the environment
With the positive pressure kit installed, the air ventilation system generates a positive pressure inside the EpiShuttle, relative to the environment. The positive pressure and the inlet filters prevent non-filtered environmental air from entering the isolator.
Negative Pressure protects the outside environment from a contagious patient
In negative pressure mode, the air ventilation system generates a negative pressure inside the EpiShuttle. The air flow is directed through the inlet filters at the head end, and through the outlet filters at the foot end. The negative pressure and the outlet filters prevent contaminated air from escaping the isolator.
Bed adjustment for patient comfort
The integrated bed is adjustable both for knee angle and backrest, allowing for increased comfort for the patient and better conditions for clinical procedures. Adjusting the position improves breathing and communication, and contributes to reducing anxiety.
Operator ports
For optimal treatment during transport, the EpiShuttle has eight interchangeable operator ports integrated into the hard top.
The ports are positioned to ensure access to all parts of the patient’s body, including airways. This enables intensive care treatment of the patient with possibility for procedures such as intubation, inserting central venous lines, urinary catheter, etc.
The ports have inner and outer lids that fasten and seal with a quarter-turn connection.
The gloves
The ambidextrous gloves are made from flame-resistant CSM/Hypalon, compliant with European regulation 2016/ 425, PPE Category 3, and tested according to EN 374-1, EN 374-5, and EN 388.
In case of damaged or ruptured gloves during use, the gloves can be replaced by using the EpiShuttle change bag.
The gloves are reusable, and can be removed and reused again if no damage or rupture is discovered.
Sluice bag
A sluice bag can be installed in the Epiport200 operator port and can be used to transfer equipment, food or medicine to the patient during transport.
Medical ports
The two medical ports are located at the head end of the EpiShuttle base. These ports can be equipped with a medical wire membrane or a ventilation sleeve.
The wireport membrane is made of a highly flexible material, allowing sealed passage of up to nine IV lines, monitoring cables, and/or oxygen lines.
The ventilator sleeve is a flexible sleeve for the entry of mechanical ventilator hose. The sleeve seals the HEPA filter that connects the ventilation hose on the clean side and the oropharyngeal tube, mask or other patient respiratory device inside the EpiShuttle.
Visit the manufacturer’s website: www.epiguard.com